Short · 43 s
Stainless Steel Pipe vs Tube: Specify the Drawing #shorts
Stainless steel pipe and tube can look identical, but the specification language differs. State the form, standard, grade, OD, wall and drawing.
- Format
- Short
- Published
- Duration
- 43 sec
- Language
- English
About this video
This Short is the concise version of the pipe-versus-tube explainer. State the form, standard, grade, OD, wall, drawing and inspection line before asking for a quotation.
English transcript
From the subtitle track delivered with the video. Refer to the video and product documentation for technical details.
Stainless steel pipe and tube can look identical. But the specification language changes the enquiry. Pipe follows piping-system language: nominal size or dimension standard.
Tube is usually specified by actual OD and wall. Neither word is complete: form, standard, grade and tolerances must agree. Which drawing and service condition are you matching?
For a round tube, OD and wall control the opening inside. ID equals OD minus twice the wall. Change the wall, and the bore and fit change too.
So specify dimensions, not a size nickname. Watch the full explainer for the dimensional and enquiry checklist.
Specify the pipe or tube for your project
Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.