Skip to main content

Explainer · 2 min 33 s

316L welded service: what the L solves, what it doesn't

316L welded service is where the letter L is most often misread: it covers the metal beside the weld, not the weld, its surface or the fluid.

Format
Explainer
Published
Duration
2 min 33 sec
Language
English
Full explainer series: Junda Explainers

About this video

This explainer is educational. It explains the published limits and the order fields for the topic; confirm the grade, standard, size, condition, inspection and documents with Junda for each order.

Chapters

Each chapter opens the video at that point on YouTube.

  1. 0:00

    316L welded service: what the L solves, what it doesn't

    A 316L pipe leaves the mill with no weld anywhere in its body. In welded service, every joint in that line is made later, somewhere else. The letter L answers one question about that joint. Your line asks three.

  2. 0:14

    What a seamless 316L pipe covers before it ships

    Seamless means what it says: no weld runs down the pipe body. The grade is 316L, UNS S31603, published to A312, A213 or A269. One number makes it the L grade. Carbon, 0.030 percent maximum. A312 fixes what the pipe is. It says nothing about how your line is welded.

  3. 0:41

    What the L grade does at a girth weld

    On site, two ends are bevelled, lined up and joined with a girth weld. The arc heats a band on both sides of the bead, and that band cools in a hurry. Inside that band, carbon and chromium can combine at the grain boundaries, and the metal beside them loses chromium. A heat with more carbon loses that chromium, and nothing in service puts it back. Cap the carbon at 0.030 percent and there is too little of it to take chromium out. So the band beside the weld keeps its corrosion resistance in service. That is the whole of what the L buys: one band, one number.

  4. 1:18

    Why 316L still pits beside the weld: heat tint on the bore

    The joint has a second side, and this is the side the L cannot cover. Weld the root without a purge and an oxide forms on the bore as the metal cools.

  5. 1:29

    Chlorides and cleaning: what 316L does not solve

    Under that oxide the chromium is already gone, and a pit starts there. 316L carries 2.0 to 3.0 percent molybdenum, the baseline for moderate chloride duty. Chlorides and acid condensates still pit it, and the L does not raise the alloy. Cleaning counts as service too. A demineralised-water line can pit after a hypochlorite sanitizer, on a surface the process never touched. So the grade you weld and the way you clean are two decisions.

  6. 2:01

    How to specify 316L pipe for welded service: tests and pickling

    That leaves three layers to write down: the material, the fabrication, the exposure. Name the standard and its edition, the size, and the delivery condition. Name the tests, and the surface: a hundred percent hydrostatic, eddy current. And name who restores the bore after welding: the mill's pickling, or the site's passivation under A380. Then the L grade is a promise you can check. Send the grade, the size and the service, and we confirm the pipe and its documents against them.

Specify the pipe or tube for your project

Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.