Skip to main content

Explainer · 2 min 19 s

PREN Calculator: Check a Supplier's Material Certificate

A PREN calculator result needs documented heat chemistry: replace typical presets, reconcile the formula and record any missing evidence.

Format
Explainer
Published
Duration
2 min 19 sec
Language
English
Full explainer series: Junda Explainers

About this video

All documents and 3D scenes are teaching illustrations, not records of an actual shipment.

Chapters

Each chapter opens the video at that point on YouTube.

  1. 0:00

    PREN calculator: can you reproduce the supplier result?

    A PREN calculator gives a number. Can you trace it to the pipe on offer? Start with the certificate, before accepting the result. Follow the marked pipe back to its certified heat. A matching grade name alone does not close that link.

  2. 0:18

    Match the pipe heat number to its material certificate

    Match the pipe marking to the material certificate and packing list. Check the grade, product standard and order reference on that same chain. If the identity does not reconcile, hold the review and request clarification. Find the chemistry table for the offered heat. Distinguish certified heat analysis from a catalogue range or a typical grade composition. Record the document reference so another reviewer can reproduce your inputs.

  3. 0:46

    Use certified chemistry in the PREN calculator

    The calculator opens with typical composition presets for shortlisting. Replace chromium, molybdenum and nitrogen with the documented heat values. Check the tungsten entry and the formula required by the project. Junda uses chromium plus weighted molybdenum, tungsten and nitrogen, entered in mass percent. Check that the supplier used the same equation and chemistry basis. Retain the input precision when comparing the result with the agreed acceptance limit.

  4. 1:17

    What to do when nitrogen or the formula is missing

    No nitrogen result on the certificate? Pause and request the missing chemistry. A favourable preset cannot fill a gap in the evidence. Matching arithmetic is only the chemistry screen. Heat treatment, microstructure and surface condition still need review. Use the specified tests and assess the actual service. Read the specified test reports and confirm which heat and test lot they represent. A test method, condition and acceptance criterion belong with each required result. A generic inspection capability is not a test record for this shipment.

  5. 1:54

    PREN screening, inspection evidence and purchase requirements

    Keep the chemistry source, formula and result together in the review record. Then reconcile the required test reports and project acceptance limits. Engineering assessment of the actual service completes the material selection. Use Junda’s PREN calculator, then send the grade, dimensions and project inspection requirements for quotation review.

Specify the pipe or tube for your project

Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.