Skip to main content

Short · 45 s

904L acid service: 98 % or 2 % #shorts

One 904L page: 0–98 % sulphuric acid, and only 1–2 % hydrochloric acid. The acid decides which of the four conditions you are ordering.

Format
Short
Published
Duration
45 sec
Language
English
Full explainer series: Junda Explainers

About this video

This explainer is educational. It explains the published limits and the order fields for the topic; confirm the grade, standard, size, condition, inspection and documents with Junda for each order.

Chapters

Each chapter opens the video at that point on YouTube.

  1. 0:00

    904L stainless steel pipe in acid service is one line on the purchase order.

    Junda's published page puts the same grade at 98 percent sulphuric acid, and at 1 to 2 percent hydrochloric.

  2. 0:14

    The acid touches one face only: the bore.

    The wall behind it carries the pressure and the corrosion.

  3. 0:25

    Then the states the page does not cover.

    After a shutdown, liquid and deposits stay on that wall. In wet-process phosphoric acid, the same page says impurities strongly affect the resistance. Watch the full explainer on our channel.

Specify the pipe or tube for your project

Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.