Skip to main content

Short · 52 s

ASTM A312 vs A269 vs A213: one grade, three documents #shorts

One 316L grade, three ASTM documents, three test schedules. The same pipe end is written three ways: NPS and schedule, outside diameter and wall, the…

Format
Short
Published
Duration
52 sec
Language
English
Full explainer series: Junda Explainers

About this video

This explainer is educational. It explains the published limits and the order fields for the topic; confirm the grade, standard, size, condition, inspection and documents with Junda for each order.

Chapters

Each chapter opens the video at that point on YouTube.

  1. 0:00

    ASTM A312, A269 and A213 all cover 316L, but only one describes your item.

    In a shell-and-tube exchanger, A213 tubes pass through a tube sheet, and each is rolled into its hole.

  2. 0:17

    That joint is why an exchanger needs a tube, not a pipe.

    So the drawing that rules the order is the exchanger drawing. Take one 316L end. The steel does not change. The order text does. A312 names a pipe size and a schedule. A269 names an outside diameter and wall.

  3. 0:37

    A213 follows the exchanger drawing, on a minimum wall.

    The full explanation, with every published number, is on our channel. Start with the form, then the document, then the wall basis.

Specify the pipe or tube for your project

Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.