Skip to main content

Explainer · 2 min 59 s

Austenitic stainless steel pipe: how to choose the grade

Austenitic stainless steel pipe is one family, not one grade: seven grades leave the mill looking the same, and two different questions pick between them.

Format
Explainer
Published
Duration
2 min 59 sec
Language
English
Full explainer series: Junda Explainers

About this video

This explainer is educational. It explains the published limits and the order fields for the topic; confirm the grade, standard, size, condition, inspection and documents with Junda for each order.

Chapters

Each chapter opens the video at that point on YouTube.

  1. 0:00

    Austenitic stainless steel pipe: how to choose the grade

    Austenitic stainless steel pipe is one family, not one grade. The catalogue carries seven of them, and they leave the mill looking the same. Start at the line, not at the grade. What is in the fluid, and how hot does it run? Those two answers decide which ladder you climb.

  2. 0:16

    Which austenitic stainless steel pipe grades Junda supplies: 304L to 254SMO

    304L and 316L, 317L, 321 and 347, 904L and 254SMO. All of them are seamless pipe to A312, A213, A269 or A376. The route does not choose the grade. All seven run the same mill; what changes is decided before the billet, and at the anneal for the H grades. The chloride ladder is bought with molybdenum. 316L is specified up to 3 percent. 904L up to 5. 254SMO up to 6.5. Each step up buys pitting and crevice resistance, and each step up costs money. The second question is not answered by more molybdenum. Heat moves a different axis: carbon, a stabiliser, and the anneal that sets the grain. 347 stops at 0.08 percent carbon; 347H sits in a 0.04 to 0.10 window. A312 designates the H grade for creep and stress rupture, not for chloride resistance.

  3. 1:30

    Molybdenum for chlorides, carbon and niobium for heat: the two axes

    The shortlist is a sequence, not a favourite. 316L first: does the process and its cleaning cycle fit? 317L: does more alloying answer the concern? 904L or 254SMO: does the duty justify the alloy? 347H: does long time at temperature govern? Before the grade, write the service record down. Chloride, oxygen, pH, velocity, stagnation and cleaning; then pressure, temperature, cycles and the piping code.

  4. 2:03

    The screening order: 316L, 317L, 904L or 254SMO, then 347H

    Two offers can carry the same grade, the same size and the same standard, and still not be the same pipe. One quotes an average wall. The other quotes a minimum wall: the same nominal size, a different guaranteed thickness. The finish, the hydrostatic hold and the NDT calibration can differ the same way. So the enquiry carries more than a grade: the standard and its edition, the size, the wall basis, the condition and the tests. Ask for a deviation schedule: one line per requirement, confirmed or excepted. Silence is not confirmation.

  5. 2:39

    Wall basis, condition and test basis: comparing two 316L offers

    Four of those questions have their own films: the H grade, the standard, the super austenitic grades, and the L. Read the one your shortlist landed on before the enquiry. Send the service conditions, the grade, the standard and the size, and we confirm the pipe and its documents against them.

Specify the pipe or tube for your project

Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.