Short · 50 s
Austenitic stainless steel pipe: two ladders #shorts
Austenitic stainless steel pipe is one family: seven grades leave the mill looking identical, and they are bought on two different axes.
- Format
- Short
- Published
- Duration
- 50 sec
- Language
- English
About this video
This explainer is educational. It explains the published limits and the order fields for the topic; confirm the grade, standard, size, condition, inspection and documents with Junda for each order.
Chapters
Each chapter opens the video at that point on YouTube.
- 0:00
Austenitic stainless steel pipe is one family, not one grade.
The catalogue carries seven of them, and they leave the mill looking the same. Start at the line, not at the grade. What is in the fluid, and how hot does it run?
- 0:13
Those two answers decide which ladder you climb.
The route does not choose the grade. All seven run the same mill; what changes is decided before the billet, and at the anneal for the H grades.
- 0:25
The second question is not answered by more molybdenum.
Heat moves a different axis: carbon, a stabiliser, and the anneal that sets the grain. Before the grade, write the service record down. Chloride, oxygen, pH, velocity, stagnation and cleaning; then pressure, temperature, cycles and the piping code. The full explainer shows the second axis, the screening order and the offer.
Specify the pipe or tube for your project
Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.
