Skip to main content

Short · 54 s

U-bend drawing: the 4 numbers the mill needs #shorts

A U-tube drawing has to fix four numbers: outside diameter and wall, bend radius, centre distance and leg length. Change the radius and the centre distance…

Format
Short
Published
Duration
54 sec
Language
English
Full explainer series: Junda Explainers

About this video

This explainer is educational. It explains the published limits and the order fields for the topic; confirm the grade, standard, size, condition, inspection and documents with Junda for each order.

Chapters

Each chapter opens the video at that point on YouTube.

  1. 0:00

    A heat exchanger tube specification is not one document.

    Straight, U-bend or rectangular: the form decides what the drawing has to say, and the mill cannot invent the rest. In the mill the bend is cold formed, then heat treated when the radius is tight.

  2. 0:16

    A ball gauge goes through the bore, and the tube is hydrotested after forming.

    A U-tube is two straight legs joined by a hundred-and-eighty-degree bend. The drawing fixes the bend radius, the centre distance between the legs, and the leg length.

  3. 0:32

    Change the radius and the centre distance moves with it.

    Bending stretches the outside of the bend and thins the wall there. The published formula is D over four R plus two D. At R one hundred it takes five point six percent. At R forty, twelve. The full explainer draws the U-tube schedule, the thinning formula and the line item.

Specify the pipe or tube for your project

Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.