Skip to main content

Short · 58 s

Incoloy 800, 800H, 800HT: not in the metal #shorts

Incoloy 800, 800H and 800HT are one alloy, and the name is not in the metal: carbon, the combined Al + Ti and the 1150 °C anneal with its grain rating decide…

Format
Short
Published
Duration
58 sec
Language
English
Full explainer series: Junda Explainers

About this video

This explainer is educational. It explains the published limits and the order fields for the topic; confirm the grade, standard, size, condition, inspection and documents with Junda for each order.

Chapters

Each chapter opens the video at that point on YouTube.

  1. 0:00

    Incoloy 800, 800H and 800HT are three names for one alloy family.

    Four lines on the specification separate them, and only three of those lines can be poured. Roll three tubes from three heats and you cannot tell them apart.

  2. 0:16

    The base analysis, the surface and the size are the same.

    Nothing you can see says which designation the mill is allowed to put on the pipe. ASTM E112 rates the grain on a polished section of the wall. Five or coarser is what 800H and 800HT have to show.

  3. 0:34

    A fine-grain pipe cannot be certified as either, whatever its carbon and aluminium say.

    In service, the difference is time at temperature. Above six hundred degrees the coarse grain carries up to double the creep strength. That is what 800H and 800HT are specified for. The full explainer shows all four lines, the anneal, and what the certificate has to carry.

Specify the pipe or tube for your project

Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.