Skip to main content

Short · 48 s

Inconel 625: Grade 1 or Grade 2? #shorts

One alloy, two heat treatments: ASTM B444 Inconel 625 pipe is supplied annealed at a minimum of 871 °C or solution annealed at a minimum of 1093 °C, and the…

Format
Short
Published
Duration
48 sec
Language
English
Full explainer series: Junda Explainers

About this video

This explainer is educational. It explains the published limits and the order fields for the topic; confirm the grade, standard, size, condition, inspection and documents with Junda for each order.

Chapters

Each chapter opens the video at that point on YouTube.

  1. 0:00

    Inconel 625 seamless pipe comes in two conditions under ASTM B444.

    Grade 1 annealed, Grade 2 solution annealed: the certificate decides.

  2. 0:12

    Below five hundred and ninety-three degrees, the job is corrosion.

    Grade 1 is specified there: fine grain, higher yield, and a wall the exchanger can use. The tubes pass through a tube sheet, and every joint has to stay tight.

  3. 0:26

    Above five hundred and ninety-three degrees, the question changes.

    The wall still holds the pressure, but the metal begins to creep: slow stretching that ends in rupture. Grade 2 is the coarse-grain condition specified for that range. The full explainer shows which condition your design temperature asks for, and what the line item has to say.

Specify the pipe or tube for your project

Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.