Skip to main content

Short · 47 s

Mill test certificate: one heat number, three places #shorts

A mill test certificate is only proof when the heat number on the paper matches the marking on the pipe and the label on the bundle.

Format
Short
Published
Duration
47 sec
Language
English
Full explainer series: Junda Explainers

About this video

This explainer is educational. It explains the published limits and the order fields for the topic; confirm the grade, standard, size, condition, inspection and documents with Junda for each order.

Chapters

Each chapter opens the video at that point on YouTube.

  1. 0:00

    A mill test certificate can be complete, signed, and still describe the wrong pipe.

    The link between the paper and the steel is one number. The same heat has to appear on the pipe itself. Mills mark the wall by ink-jet, electrochemical etching or low-stress vibro-etching.

  2. 0:16

    A mark you cannot read is a link you cannot check.

    Type 3.1 is issued by the mill, and validated by its own inspection. That inspector is independent of production. Type 3.2 adds an inspector independent of the mill, or a third party.

  3. 0:31

    The project specification picks which one.

    The finished pipes are bundled, and the label carries the heat again. Tag, packing list and certificate have to read the same. Junda confirms the documents in the quotation.

Specify the pipe or tube for your project

Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.