Explainer · 53 s
Average wall or minimum wall: one word, two pipes #shorts
One word inside a pipe enquiry decides what arrives: the wall basis. Average wall or minimum wall on the same NPS 4 schedule 40S pipe.
- Format
- Explainer
- Published
- Duration
- 53 sec
- Language
- English
About this video
This Short is the one-minute version of the eight-field explainer. It isolates the one word inside an enquiry that decides what arrives: the wall basis, shown on NPS 4 schedule 40S at 114.3 mm outside diameter and 6.02 mm nominal wall.
Chapters
Each chapter opens the video at that point on YouTube.
- 0:00
A stainless steel pipe enquiry is a translation job.
Project datasheets go in. A purchase specification has to come out. Two mills can quote the same pipe and hand back two different products. Dimensions are two numbers and a basis.
- 0:15
NPS four is 114.3 millimetres of outside diameter.
Schedule 40S puts 6.02 millimetres of wall on it, so the bore is 102.26. One word decides what arrives: the wall basis.
- 0:30
Average wall: thin places paid for by thick ones.
Minimum wall makes the nominal number the thinnest point the order accepts. Same nominal size, and a heavier pipe. Then the wall with its basis, the length, the tests and the documents. That is a line a mill can quote without asking three questions. The full explainer lists all eight fields, in the order a mill reads them.
Specify the pipe or tube for your project
Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.
