Skip to main content

Explainer · 29 s

Stainless steel tube size chart: 1/2 in is 12.70 mm #shorts

A 1/2 in tube is 12.70 mm outside and an NPS 1/2 pipe is 21.3 mm; schedule 40S leaves a 15.76 mm bore against 9.70 mm, so name the size and the wall basis.

Format
Explainer
Published
Duration
29 sec
Language
English
Full explainer series: Junda Explainers

About this video

The inch name is shared; the size is not. This Short puts a 1/2 in tube beside an NPS 1/2 pipe at one scale, then shows why the bore decides the fitting. Every dimension is the published ASME B36.19 value.

Chapters

Each chapter opens the video at that point on YouTube.

  1. 0:00

    A half-inch tube is 12.70 mm.

    A half-inch tube is 12.70 millimetres of outside diameter.

  2. 0:03

    A half-inch pipe is 21.3 mm.

    A half-inch pipe is 21.3 millimetres, and the inch name is shared.

  3. 0:06

    Tube: outside diameter and wall.

    Tube is ordered by outside diameter and wall.

  4. 0:09

    Pipe: NPS and schedule.

    Pipe is ordered by NPS and schedule.

  5. 0:12

    The bore decides the fitting.

    A 1.5 mm wall leaves a 9.70 mm bore; schedule 40S at NPS 1/2 leaves 15.76 mm, so a fitting sized to one will not take the other.

  6. 0:16

    The schedule is a table.

    The schedule is a table, not a number: 40S is 3.38 mm at NPS 1 and 8.18 mm at NPS 8.

  7. 0:19

    Name the standard and the edition.

    Name the standard and the edition: A269 for tube, A213 for heat exchanger tube, A312 for pipe.

  8. 0:22

    Then the wall basis and the tests.

    Then the wall basis and the tests, written on the order.

Specify the pipe or tube for your project

Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.