Short · 51 s
Super austenitic vs super duplex: one phase or two? #shorts
254SMO and 2507 land on the same pitting number. The structure is what decides: one phase or two, 300 or 550 MPa, and what the mill has to prove.
- Format
- Short
- Published
- Duration
- 51 sec
- Language
- English
About this video
This explainer is educational. It explains the published limits and the order fields for the topic; confirm the grade, standard, size, condition, inspection and documents with Junda for each order.
Chapters
Each chapter opens the video at that point on YouTube.
- 0:00
Super austenitic, super duplex: two families, and on the pitting screen they land in the same place.
So the screen cannot choose the pipe. The structure can, and it sets what the mill has to prove. 254SMO is one phase: a face-centred cubic austenite, annealed at eleven fifty to twelve hundred.
- 0:19
2507 is two phases: austenite and ferrite, side by side in the same steel.
Here is what the grade name hides. At six hundred to one thousand degrees, intermetallic phases form on these boundaries.
- 0:34
254SMO is published as passing the intergranular test after an hour in that range.
The full explanation, with every published number, is on our channel. Start with the structure, then order the condition. Send the duty and the grade, and we confirm the pipe.
Specify the pipe or tube for your project
Send the grade, standard, OD × wall × length, wall basis, quantity, inspection and documents with your enquiry.
