Skip to main content

Inner / outer finish Ra 0.15 µm

Made to order

Inner / outer finish Ra 0.15 µm is manufactured in Junda's Precision stainless steel tubing (BA / EP / coiled) range. Send the required size, standard and inspection scope for a technical quotation.

All products are made to order. Length, outside diameter, wall thickness and profile dimensions are customized to your drawing. Send the required dimensions and tolerances for manufacturing review.

Open the catalogue image for a closer look.

Inner / outer finish Ra 0.15 µm

Inner / outer finish Ra 0.15 µm
JUNDA / JUNGANGProduct gallery

Technical specifications

Made to order
Product
Inner / outer finish Ra 0.15 µm
Dimensions
Custom outside diameter × wall thickness × length; tolerances agreed for each order.
Schematic · Ø outside diameter · t wall · L length

Chemical composition and mechanical properties are available with the mill certificate for the supplied heat. Send the required grade and standard for a technical quotation.

Grade engineering

Standard review

BA and EP surface finish ranges

Bright annealing (BA) typically holds Ra ≤ 0.4 µm; electropolishing (EP) after bright annealing typically holds Ra ≤ 0.25 µm. A tighter Ra 0.15 µm finish is a project-specific option confirmed against a sample or inspection report.

FinishTypical RaProcessTypical service
BA≤0.4 µmBright anneal in a controlled atmosphereHydraulic, instrumentation and clean-gas lines
EP≤0.25 µmElectropolish after bright annealSemiconductor, pharmaceutical and high-purity systems
Special≤0.15 µmProject-specific mechanical or electrochemical polishConfirmed by sample and inspection record

Cleanliness and continuous coil length

Surface roughness alone does not define a clean tube. The order fixes the standard (ASTM A269 or A213), the Ra measurement method, residue or particle limits, end capping and packaging.

Continuous coil length is confirmed for each OD and wall combination. Coil weight, transport limits, straightness and the required number of welds are reviewed in the quotation; do not assume that a single coil can cover an unlimited length.

  • BA or EP inner and outer surface
  • Oil-free, capped and packed for clean service
  • Hydrostatic and eddy-current testing as ordered
  • Coil length and welding plan confirmed per size

Theoretical mass

Calculate Inner / outer finish Ra 0.15 µm weight

Enter the outside diameter and wall thickness in millimetres. The nominal density is fixed at 8 g/cm³ for 316 / 316L stainless steel. The result is a theoretical mass; the mill certificate and the ordered tolerance govern the delivered weight.

Weight per metre16.383 kg/m
Request a quote for this size

Need a project-specific review?

Send the material designation, required dimensions, quantity, destination, target delivery date and inspection requirements so the Junda team can review the request.

Request a technical quoteRFQ worksheet (English · TXT)

Information to include in your enquiry

  1. Material grade or product family
  2. Custom outside diameter × wall thickness × length; tolerances agreed for each order.
  3. Quantity and target delivery location
  4. Applicable standard and inspection requirements
  5. Target delivery date and project notes

Engineering playbooks

Browse all playbooks

Use the free calculators to screen PREN, pressure and sour-service conditions, or review a mill test certificate before an enquiry. Each page states its formula and limits.

How do I specify and order Inner / outer finish Ra 0.15 µm?

This page summarises the grade, typical standards and product form. The quotation confirms the exact dimensions, heat treatment, test programme and documents.

Where does Inner / outer finish Ra 0.15 µm sit in the catalogue?

Inner / outer finish Ra 0.15 µm is manufactured in the Precision stainless steel tubing (BA / EP / coiled) group. The page shows the grade designation, typical standards, product form and the technical documents available with the order.

What sizes can be made, and how are MOQ and lead time set?

The mill manufactures seamless pipe from φ6–φ630 mm outside diameter and 0.2–80 mm wall thickness; that is the production range, not a stock list for this grade. Dimensions, tolerances, lengths, supply condition, inspection documents, minimum order quantity and lead time are confirmed in the quotation.

What should I include in a pipe enquiry?

Email sales@jundapipe.com or use the contact form. Include the material grade or product family, outside diameter × wall thickness × length, quantity and destination, the applicable standard and inspection requirements, and a target delivery date if you have one. Phone is optional. Dimensions, minimum order quantity and lead time are confirmed in the quotation.